I have an in-ground swimming pool 18×36, will the water absorb the scalar energy and imprint the water in the pool if I set up the Scalar on either side, on the end where the inlet valve is?

No, it won’t, but anyone in the field would benefit from it. The best way to reset your water is to go to install a water filter, get from a hardware store, in the water line feeding pool and/or house. Remove the supplied filter and install a cut to length 3/4″ PVC pipe. Drill holes in the bottom 1-2″ of pipe around the circumference of pipe. Standpipe in the bottom of the filter and fill the housing with marbles…it will take about 100 or more depending on size. Craft or toy stores will have these. Then insert it into the filter head and your water will be reset. Every time water changes direction, it starts to return to natural state.

I do my whole house that way on structured water and it works great! Of course, a swimming pool would take a while to clear, so I would install it where water recirculates and after makeup water is added.

For more details, please check this link:
https://www.facebook.com/groups/spooky2scalar/posts/1170683100171913/